My Film Opening Sequence



My Film Opening Sequence

Sunday, 20 March 2016

Evaluation Question 7 : Looking back at your preliminary task, what do you feel you have learnt in the progression from it to the full product?

Looking back at the preliminary task I feel that I now know a lot more.

The brief for our preliminary task was:

"Continuity task involving filming and editing a character opening a door, crossing a room and sitting down in a chair opposite another character, with whom she/he then exchanges a couple of lines of dialogue. This task should demonstrate match on action, shot/Reverse shot and the 180 degree rule."



The brief to our production task was: 
"To produce a 2-minute opening sequence for a fiction film. All video and audio material must be original, produced by candidate(s), with the exception of music and audio effects from a copyright-free source. It should be clear from your sequence who the audience is."

The differences I found between the two briefs: 
  • Production task had a time-limit.
  • Production task had a focus on audience.
  • Production task was more open to creativity.
  • Preliminary task was controlled and specific
  • Preliminary task had a focus on Camera rules.
Planning:
A lot more planning went into our Production task than it did to our Preliminary task. For our real opening we needed to plan:
  1. Location
  2. Representing characters
  3. Mise-en-scene
  4. Camera angles and framing
  5. Sound FX
  6. Music
In comparison to our real Opening; the preliminary task was barely planned. We were limited to our group to act and the task was done in lesson time. We were given a location and time for the shoot. This contrasts our Production task as there was a lot more that needed to be done. 

Since it states the task should have a clear audience, we needed to take genre highly into consideration as this was a way we were going to target are TA. This made our group have to do research into different genres and Target audiences. 

We needed to decide on actors, locations, plan the shoot in detail, make a shootboard, storyboard and animatic. 

Production:
I feel that doing the preliminary task was fundamental when it came to our Film opening as we learnt a variety of techniques and rules which needed to be followed. 

Match on Action
Continuity in a scene where character movement is continuous and doesn't jump between shots.



Examples of Match on action in our Prelim (top) and our Film opening (bottom)
As you can see from the Gifs above, the action in continuous without any 'jumps' or 'glitches'. For example when the door opens it cuts to Flo's reaction, after this the progression of time is so that Ella is already half way into the room.


180° rule











This form of continuity is where the camera must not move more than 180 around your actor. This is don't so not to confuse the audience with setting.


An example where we used this rule in our film opening






Over the shoulder shots:














These shots help the audience understand the point of view of the actor

Master shots:


























Running a shoot:
During the shoot I got a great experience of using the clapper board, camera and directing. Since I am someone who likes to take a 'leading' role in projects, being a directer by guiding actors, and maintaining everyone helped me to further knowledge myself on how to be more 'people friendly' but still achieving the main goal.

Post Production:
I already knew how to use Adobe Premier Pro from Gcse and from the Prelim task. As the project progressed, my knowledge was further developed and I become much more familiar with the software and being able to use more tools with ease such as add effects, and grade shots.

Evaluation process
For our Prelim we self evaluated and picked out issues. This wasn't the case for our film sequence as we would show people the progress during production and after production. We received a lot of feedback that helped us to improve our sequence and then asked for feedback from our TA where we reflected whether or not we achieved our goal.

Working as a team:
This skill is important throughout life and not just in the Media industry. During the prelim I learnt that communication amongst group members was vital to highlight any important issues. We carried this on when we started our groupwork; we created a Whatsapp Groupchat to share research, ideas, and to raise problems as well as having 2 hour meetings every week.

Conclusion
During these two projects, I developed my understanding of technology and film theories and am now able to apply that knowledge. If given more time we could have further been able to improve our opening. Saying this I enjoyed making the opening and found it was a great learning experience.








Thursday, 10 March 2016

Construction Post 10: Looking back - reflections on our final outcome

I feel that our project as a whole was extremely well organised and successful. This was done as our group worked well as a team which is a key part of our success.








The final capture scene where I would have added a few more shots.










Our teachers and TA really liked our final opening sequence, most saying that they would definitely watch the rest of the film. “I really liked how it ended on a close up of the hacker followed by the audio in the blackout” 

Construction Post 9: My technical learning curve

I feel that I am extremely advanced when it comes to technology. This has come from my curiosity of computers and computer science since I was little. Saying this, during this project I have been able to familiarise myself further with Adobe Premier pro. A prime example of this is the CCTV shots our group made. I learnt how to distort an image using 'noise' and add a time frame of my choice This allowed us to create a convincing CCTV shot but also furthered my knowledge on the 'effects' side of Adobe PP. 


Another important technical lesson I have learnt is the importance of getting extra footage whilst shooting. This is done to make continuity a lot easier to achieve as you can match shots with the extra footage instead of being limited to just cropped frames. We learnt this mistake from our test shoot and took it into consideration greatly in our final and backup shoot. 


Construction Post 8: My personal contribution to the Edit Sessions

Personally, editing is one of my greatest strengths as I edit my friend's YouTube videos for his account and so I was already familiar with the software and aware of work input needed. This previous experience with Adobe premier pro allowed me to work quickly and efficiently to a high standard. 
I spent all my free study periods on our edit suite and edited about two hours on average each day. Our group also gave a couple of days each week after school to edit, organise the edit and look over work that had been done.


Construction Post 7: My Personal contribution to the Shoot Sessions

I contributed heavily to the shoot sessions as it is something I really enjoy doing. During the shoots, I mainly directed the actors, filmed and thought of 'on the spot' shots that may have looked nice when it came to editing. I oversaw the framing of the other group members' camera work to ensure it was accurate and well framed.



Construction Post 6: Reflections on Edit Week 2

Edit week 2 proved quite difficult for our group and more problems arose than in week 1.

First off, we couldn't create the full sequence on Adobe Premier Pro as we had not yet filmed the Seward studio back up shoot shots. This proved difficult as despite leaving gaps, our sequence made no sense and was extremely difficult for us to identify where these shots would go or where titles would go.

Another problem that arose was continuity errors. Because we filmed on two different weeks at two different times, many factors had changed. During the tube shots, the same people were never passing by at the same time but nothing could be done about this while shooting. Instead, we cleverly cut shots in ways which would not show this error or would show it to a minimal unnoticeable degree.

After filming the Seward studio shots our group editing was behind schedule despite putting in the agreed times. We quickly decided that it would be best if we had another group editing session at lunch and a short 15 minute meeting at break to organise who would do what, when they were editing alone to best utilise our time. This method  proved effective as we managed to get back on track and meet the deadline.


Colour grading wasn't really an issue. Lighting in the bedroom shots was the same throughout and it was brightly lit and so minimal colour grading was needed. During the running shots however it was slightly more difficult; the sunlight would alter slightly from clouds passing and so this changed the saturation of shots to give a slightly altered look. This proved to be the most challenging colour grading as each shot had different amounts of saturation and colour alteration needed to look realistic and fit in with each other.


Our TA focus group liked our sequence and said it had improved since the previous viewings, they mentioned how to ending was still a bit hard to follow and so we then extended some shots and changed the continuity slightly. We were then told that it was a lot “smoother” and “understandable”. Our teachers picked up on more technical aspects such as having the boom microphone in the typing shot, which “although unnoticeable” is “unprofessional” and breaks the “viewers emergence” in the sequence. 



Construction Post 5: The Back-Up Shoot

A backup shoot wasn't entirely necessary but I thought it would be best to redo some shots to make sure they were perfect and have extra footage to give options to alter our continuity sequences.  The video below is of setting up the Seward studio which we used as a HQ on the backup shoot. 


Some shots that were taken on the backup shoot are as follows: 



We utilised the backup shoot and managed to make better continuity tasks. The seward studio shots were a bit grainy and so we added higher key lighting. This made shots less grainy and gave it a better quality feel. The decision to change these shots came from our teachers and peer feedback as they said shots lacked a ‘professional feel’ despite being well framed.